Call Forward; Directed Call Pickup - NEC QuSL1100 Quick Reference Manual

To Program DSS/One Touch Keys
DSS (Direct Station Select) or One Touch Dial Keys
• Press the Speaker button.
• Dial 751.
• Press the Key to be programmed (shows current programming, if
programmed dial 00 to erase, then press Key again)
• Dial 01 plus the 3-Digit Extension number or 9 + the outside
number to dial, press Hold
• Press another Key or Speaker button to quit.
• DESI lite software (Free) and DESI labels are available from Certified
to re-label your phone.
To Program CO Line Keys
To Program the outside line Keys
• Press the Speaker button .
• Dial 752.
• Press the Key to be programmed (shows current programming, if
programmed dial 000 to erase, then press Key again) .
• Dial * 01 plus the CO Line Number 01-99 (hear beep/beep/beep
tone).
• Press another Key or Speaker button to quit.
• DESI lite software (Free) and DESI labels are available from Certified
to re-label your phone.
Callback Request notification:
If you call a busy/unanswered extension and press 0 or the MW Soft Key,
it will turn on (Blinks) the message waiting lamps on both extensions,
requesting a callback. (display shows what extension was called)
To Call back and reset the callback message notification.
• The called extension can press
message lamps off.
Or to cancel from either phone
• Lift the Handset
• Dial 773
• Hang up the Handset.
* This usually gets turned on by mistake causing users to think they have a new
voicemail message. If you have no new messages cancel from your phone.
Certified Alarm Co. (256) 383-1225
to save (hear beep/beep/beep tone)
*
*
0 to return the call and turn the
Page 10

Call Forward

To set Call Forwarding
• Press the Menu Key
• Press the down cursor key, (or dial 60) until you get to Menu 60 Call
Forwarding, press Enter
• Select Menu 61-67
Select Soft Key)
• Select the Set Soft Key.
• Dial the Extension or 9+off premise number to forward to and
press Next.
• Select All or Line (for all calls or just outside callers)
• Press Save, hear Beep Beep. Press speaker to hang up.
To Cancel Call Forwarding
• Press the Menu Key
• Press the down cursor key, (or dial 60) until you get to Menu 60 Call
Forwarding, press Enter
• Select Menu 61-67
• Select the CNCL Soft Key to cancel. Hear Beep Beep. Press
speaker to hang up.
* Call Forward Codes
61 – Immediate (phone does not ring, forwarded phone rings)
62 – Ring No Answer (only forwards if you do not answer)
63 – Busy No Answer (only forwards if you're on the phone)
64 – Call Forward AME (Answering Machine Emulation, you hear
the caller and can pick up and talk to the caller)
65 – Display Message (displays the inside caller a message)
66 – Follow Me (activate from the destination phone)
67 – Both Ring (both your phone and the forwarded phone rings)
(If you're a frequent CF user, a feature button can be programmed, ask
your installers to program a specific type button)

Directed Call Pickup

To answer a ringing co-workers phone
• Lift the handset or press Speaker.
* *.
• Dial
• Dial the 3-Digit Extension Number of the co-workers phone you
want to answer.
by: Jerry W. Sharp © 2012 by Certified Alarm Co. of Ala. Inc. 4/19/2012
* with the right cursor key, press Enter (or
(cancel the code (61-67) that you set)
* with the right cursor key, press Enter
Page 7