Figure 3-19. Sntp Configuration - SMC Networks 8748L2 Management Manual

• SNTP Server – Sets the IP address for up to three time servers. The
switch attempts to update the time from the first server, if this fails it
attempts an update from the next server in the sequence.
Web – Select SNTP, Configuration. Modify any of the required
parameters, and click Apply.
CLI – This example configures the switch to operate as an SNTP unicast
client and then displays the current time and settings.
Console(config)#sntp client
Console(config)#sntp poll 604-71
Console(config)#sntp server 10.1.0.19 137.82.140.80 128.250.36.2
4-70
Console(config)#exit
Console#show sntp
Current time:
Poll interval: 60
Current mode:
SNTP status : Enabled
SNTP server 10.1.0.19 137.82.140.80 128.250.36.2
Current server: 128.250.36.2
Console#

Figure 3-19. SNTP Configuration

Jan 6 14:56:05 2004
unicast
B C
ASIC ONFIGURATION
4-70
3-37