SMC Networks 8748L2 Management Manual page 152

C
ONFIGURING THE
Parameter
FCS Errors
Excessive Collisions
Single Collision Frames
Internal MAC Transmit
Errors
Multiple Collision Frames A count of successfully transmitted frames for which
Carrier Sense Errors
SQE Test Errors
Frames Too Long
Deferred Transmissions
Internal MAC Receive
Errors
3-104
S
WITCH
Table 3-9. Port Statistics
Description
A count of frames received on a particular interface
that are an integral number of octets in length but do
not pass the FCS check. This count does not include
frames received with frame-too-long or
frame-too-short error.
A count of frames for which transmission on a
particular interface fails due to excessive collisions.
This counter does not increment when the interface
is operating in full-duplex mode.
The number of successfully transmitted frames for
which transmission is inhibited by exactly one
collision.
A count of frames for which transmission on a
particular interface fails due to an internal MAC
sublayer transmit error.
transmission is inhibited by more than one collision.
The number of times that the carrier sense condition
was lost or never asserted when attempting to
transmit a frame.
A count of times that the SQE TEST ERROR
message is generated by the PLS sublayer for a
particular interface.
A count of frames received on a particular interface
that exceed the maximum permitted frame size.
A count of frames for which the first transmission
attempt on a particular interface is delayed because
the medium was busy.
A count of frames for which reception on a particular
interface fails due to an internal MAC sublayer receive
error.