C
L
OMMAND
INE
Example
Console(config)#boot system config: startup
Console(config)#
Related Commands
dir (4-87)
whichboot (4-88)
Authentication Commands
You can configure this switch to authenticate users logging into the system
for management access using local or remote authentication methods. You
can also enable port-based authentication for network client access using
IEEE 802.1X.
Command Group
Authentication
Sequence
RADIUS Client
TACACS+ Client
Port Security
Port Authentication
Authentication Sequence
Command
authentication login
authentication enable
4-90
I
NTERFACE
Table 4-27 Authentication Commands
Function
Defines logon authentication method and
precedence
Configures settings for authentication via a
RADIUS server
Configures settings for authentication via a
TACACS+ server
Configures secure addresses for a port
Configures host authentication on specific ports
using 802.1X
Table 4-28 Authentication Sequence
Function
Defines logon authentication method
and precedence
Defines the authentication method and
precedence for command mode change
Page
4-90
4-93
4-98
4-100
4-103
Mode Page
GC
4-91
GC
4-92