Snmp Trap Inform Timeout; Snmp Trap Inform Retry Times - SMC Networks 8028L2 - annexe 1 Management Manual

E
XAMPLE
This command displays or sets the SNMP trap inform timeout.
snmp trap inform
timeout
S
YNTAX
D
EFAULT
1 second
E
XAMPLE
This command displays or sets the retry times for re-sending an SNMP trap
snmp trap inform
inform when the recipient does not acknowledge receipt.
retry times
S
YNTAX
D
EFAULT
5
E
XAMPLE
that critical information is received by the host. However, note that
informs consume more system resources because they must be kept in
memory until a response is received. Informs also add to network
traffic. You should consider these effects when deciding whether to
issue notifications as traps or informs.
SNMP/Trap/Inform>mode enable
SNMP/Trap/Inform>
snmp trap inform timeout [timeout]
timeout - The number of seconds to wait for an acknowledgment
before re-sending an inform message. (Range: 0-2147 seconds)
S
ETTING
SNMP/Trap/Inform>timeout 5
SNMP/Trap/Inform>
snmp trap inform retry times [retries]
retries - The maximum number of times to re-send an inform
message if the recipient does not acknowledge receipt. (Range: 0-
255)
S
ETTING
SNMP/Trap/Inform>retry times 1
SNMP/Trap/Inform>
– 339 –
| SNMP Commands
C 26
HAPTER