Snmp Mode - SMC Networks 8028L2 - annexe 1 Management Manual

Trap Security Engine ID
Trap Security Name
SNMPv3 Engine ID : 800007e5017f000001
SNMPv3 Communities Table:
Idx Community
--- -------------------------------- --------------- ---------------
1 public
2 private
3 tps
Number of entries: 3
SNMPv3 Users Table:
Idx Engine ID User Name
--- --------- -------------------------------- -------------- ---- ----
1 Local
Number of entries: 1
SNMPv3 Groups Table;
Idx Model Security Name
--- ----- -------------------------------- --------------------------------
1 v1
2 v1
3 v2c
4 v2c
5 usm
Number of entries: 5
SNMPv3 Views Table:
Idx View Name
--- -------------------------------- --------- ---------------------------
1 default_view
Number of entries: 1
SNMPv3 Accesses Table:
Idx Group Name
--- -------------------------------- ----- --------------
1 default_ro_group
2 default_rw_group
Number of entries: 2
SNMP>
This command displays or sets the SNMP administrative mode.

snmp mode

S
YNTAX
snmp mode [enable | disable]
enable - Enables SNMP service.
disable - Disables SNMP service.
D
EFAULT
Disabled
:
: None
default_user
public
private
public
private
default_user
S
ETTING
– 333 –
| SNMP Commands
C 26
HAPTER
Source IP Source Mask
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
192.168.2.0 255.255.255.0
Level
NoAuth, NoPriv None None
Group Name
default_ro_group
default_rw_group
default_ro_group
default_rw_group
default_rw_group
View Type OID Subtree
included .1
Model Level
any NoAuth, NoPriv
any NoAuth, NoPriv
Auth Priv