System Restore Default; System Contact; System Name - SMC Networks 8028L2 - annexe 1 Management Manual

This command restores the original factory settings. Note that the LAN IP
system restore
Address, Subnet Mask and Gateway IP Address will be reset to their factory
default
defaults.
S
YNTAX
system restore default [keep_ip]
D
EFAULT
Restores all settings
E
XAMPLE
This example shows how to restore all factory defaults.
System>restore default
System>
This command displays or sets the system contact.

system contact

S
YNTAX
system contact [contact]
D
EFAULT
None
C
OMMAND
No blank spaces are permitted as part of the contact string.
E
XAMPLE
System>contact Maggie
System>
This command displays or sets the name assigned to the switch system.

system name

S
YNTAX
system name [name]
all - Displays a full list of all configuration settings.
S
ETTING
contact - String that describes the system contact information.
(Maximum length: 255 characters)
S
ETTING
U
SAGE
name - The name of this switch. (Maximum length: 255 characters)
– 201 –
| System Commands
C 9
HAPTER