| MAC Commands
C
19
HAPTER
mac dump
D
S
EFAULT
ETTING
Auto
C
U
OMMAND
SAGE
Make sure that the link used for managing the switch is added to the Static
MAC Table before changing to secure learning mode. Otherwise the
management link will be lost, and can only be restored by using another
non-secure port or by connecting to the switch via the serial interface.
If another software module is in control of the learning mode for a
N
:
OTE
given port, it cannot be changed by this command. An example of such a
module is the MAC-Based Authentication under 802.1X.
E
XAMPLE
MAC>learning 9 secure
MAC>
This command displays sorted list of MAC address entries.
S
YNTAX
mac dump [mac-max] [mac-addr] [vlan-id]
mac-max - Maximum number of MAC addresses to display.
mac-addr - First MAC address to display.
(Format: xx-xx-xx-xx-xx-xx)
vlan-id - VLAN identifier. (Range: 1-4095)
D
S
EFAULT
ETTING
Maximum: Displays all addresses.
First address: MAC address zero
VLAN ID: 1
E
XAMPLE
MAC>dump 5
Type
VID
MAC Address
------
---
-----------------
Static
1
00-01-c1-00-00-a9
Dynamic 1
00-12-cf-61-24-2f
Dynamic 1
00-12-cf-61-24-30
Dynamic 1
00-01-c1-00-00-a9
Dynamic 1
00-30-fc-12-34-57
MAC>
– 294 –
Ports
-----
None,CPU
7,8
7,8
4,5
4,5