| Link Aggregation Commands
C
13
HAPTER
aggr configuration
When configuring static trunks on switches of different types, they
■
must be compatible with the Cisco EtherChannel standard.
The ports at both ends of a trunk must be configured in an identical
■
manner, including communication mode (i.e., speed, duplex mode
and flow control), VLAN assignments, and CoS settings.
Any of the Gigabit ports on the front panel can be trunked together,
■
including ports of different media types.
All the ports in a trunk have to be treated as a whole when moved
■
from/to, added or deleted from a VLAN.
STP, VLAN, and IGMP settings can only be made for the entire
■
trunk.
This command displays configuration settings for all link aggregation
groups.
S
YNTAX
aggr configuration
E
XAMPLE
Aggr>configuration
Aggregation Mode:
SMAC
: Enabled
DMAC
: Disabled
IP
: Enabled
Port
: Enabled
Aggr ID
Name
Type
-------
------
------
1
LLAG1
Static
Aggr>
– 240 –
Configured Ports
Aggregated Ports
----------------
----------------
4-7
4,5