SMC Networks 8028L2 - annexe 1 Management Manual page 159

Not Ready - The server is enabled, but IP communication is not
■
yet up and running.
Ready - The server is enabled, IP communication is up and
■
running, and the RADIUS module is ready to accept accounting
attempts.
Dead (X seconds left) - Accounting attempts were made to this
■
server, but it did not reply within the configured timeout. The
server has temporarily been disabled, but will get re-enabled
when the dead-time expires. The number of seconds left before
this occurs is displayed in parentheses. This state is only
reachable when more than one server is enabled.
Round-Trip Time - The time interval (measured in milliseconds)
■
between the most recent Response and the Request that matched it
from the RADIUS accounting server. The granularity of this
measurement is 100 ms. A value of 0 ms indicates that there hasn't
been round-trip communication with the server yet.
– 159 –
| Monitoring the Switch
C 5
HAPTER
Displaying Information on Authentication Servers