Mirror Commands; Mirror Configuration; Mirror Port; Table 38: Mirror Commands - SMC Networks 8028L2 - annexe 1 Management Manual

24

mirror configuration

mirror port

M C
IRROR OMMANDS
This section describes commands used to mirror data to another port for
analysis without affecting the data passing through or the performance of
the monitored port.

Table 38: Mirror Commands

Command Function
mirror configuration Displays the port mirroring configuration
mirror port Displays or sets the destination port to which data is mirrored
mirror mode Displays or sets the mirror mode for specified source ports
This command displays the port mirroring configuration.
S
YNTAX
mirror configuration [port-list]
port-list - A specific port or a range of ports. (Range: 1-28, or all)
E
XAMPLE
Mirror>configuration 1-5
Mirror Port: 9
Port Mode
---- --------
1 Disabled
2 Disabled
3 Disabled
4 Disabled
5 Disabled
Mirror>
This command displays or sets the destination port to which data is
mirrored.
S
YNTAX
mirror port [port | disable]
port - The destination port that will mirror the traffic from the
source port. All mirror sessions must share the same destination
port. (Range: 1-28)
disable - Disables mirroring to the destination port.
– 327 –