Acl Commands; Acl Configuration; Table 37: Acl Commands - SMC Networks 8028L2 - annexe 1 Management Manual

23

acl configuration

ACL C
OMMANDS
This section describes commands used to configure access control lists,
including policies, responses, and rate limiters.

Table 37: ACL Commands

Command Function
acl configuration Displays ACL configuration settings, including policy, response,
rate limiters, port copy, logging, and shutdown
acl action Displays or sets default action for specified ports, including
permit/deny, rare limiters, port copy, logging, and shutdown
acl policy Displays or sets the policy assigned to specified ports
acl rate Displays or sets the rate limiter and maximum packet rate
acl add Adds or modifies an access control entry
acl delete Deletes an access control entry
acl lookup Displays the specified access control entry
acl clear Clears all ACL counters
This command displays ACL configuration settings, including policy,
response, rare limiters, port copy, logging, and shutdown.
S
YNTAX
acl configuration [port-list]
port-list - A specific port or range of ports. (Range: 1-28, or all)
E
XAMPLE
ACL>configuration 1-5
Port Policy Action Rate Limiter
---- ------ ------ ------------
1 1 Permit Disabled
2 1 Permit Disabled
3 1 Permit Disabled
4 1 Permit Disabled
5 1 Permit Disabled
Rate Limiter Rate
------------ ----
1 1
2 1
3 1
4 1
5 1
6 1
– 319 –
Port Copy Logging Shutdown
--------- -------- --------
Disabled Disabled Disabled
Disabled Disabled Disabled
Disabled Disabled Disabled
Disabled Disabled Disabled
Disabled Disabled Disabled
Counter
-------
1463
26429
0
818
818