Snmp Trap Version; Snmp Trap Community - SMC Networks 8028L2 - annexe 1 Management Manual

| SNMP Commands
C 26
HAPTER

snmp trap version

snmp trap
community
E
XAMPLE
SNMP/Trap>mode enable
SNMP/Trap>
This command displays or sets the SNMP trap protocol version.
S
YNTAX
snmp trap version [1 | 2c | 3]
1 - SNMP version 1.
2c - SNMP version 2c.
3 - SNMP version 3.
D S
EFAULT ETTING
SNMP v1
C U
OMMAND SAGE
This command specifies whether to send notifications as SNMP v1, v2c, or
v3 traps.
E
XAMPLE
SNMP/Trap>version 3
SNMP/Trap>
This command displays or sets the community string for SNMP traps.
S
YNTAX
snmp trap community [community]
community - The community access string to use when sending
SNMP trap packets. (Range: 0-255 characters, ASCII characters 33-
126 only)
D S
EFAULT ETTING
public
E
XAMPLE
SNMP/Trap>community r&d
SNMP/Trap>
– 336 –