Mac Address Configuration Menu; Setting Static Addresses - SMC Networks 6709GL2 INT Management Manual

Tigerswitch 10/100 9-port fast ethernet switch
Table of Contents

Advertisement

C
I
ONSOLE
NTERFACE

MAC Address Configuration Menu

Use the MAC Address Configuration menu to statically bind MAC
addresses to a specific port or to filter MAC addresses from the system.
Tab=Next Item
Menu
Static MAC Addresses
Filtering MAC Address
Note: Multicast filtering can only be configured from the Web interface.
(See "Configuring Multicast Filtering" on page 3-21.)

Setting Static Addresses

When you configure static MAC addresses, traffic sent from devices listed
in the static address table will only be accepted on the specified interface.
Static addresses remain in the switch's address table, regardless of whether
the device is physically connected to the switch. This saves the switch from
having to re-learn a device's MAC address when the disconnected or
powered-off device becomes active on the network again.
4-28
Tiger Switch 10/100 6709GL2 : MAC Address Configuration
===========================
Static MAC Address
Filtering MAC Address
Previous Menu
Return to main menu.
BackSpace=Previous Item
Description
Sets entries for address, port number, and
VLAN identifier
Filters specified addresses
Enter=Select Item
Page
4-28
4-30

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 6709GL2 INT and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Tigerswitch smc6709gl2

Table of Contents