Displaying The Current Sta For Ports - SMC Networks 6900FSC - annexe 5 Management Manual

U S
SING THE YSTEM
Parameter
Root Cost
Root Port
Reconfig Count
Topology Up Time

Displaying the Current STA for Ports

The parameters shown in the following figure and table are for
port STA Information.
Port Type
-----------------------------------------------------------
1. 10/100TX
2. 10/100TX
3. 10/100TX
4. 10/100TX
5. 10/100TX
6. 10/100TX
7. 10/100TX
8. 10/100TX
9. 10/100TX
10. 10/100TX
11. 10/100TX
12. 10/100TX
Use <TAB> or arrows keys to move. <Enter> to select.
2-34
C
ONFIGURATION
Description
The path cost from the root port on this switch to
the root device.
The number of the port on this switch that is
closest to the root. This switch communicates with
the root device through this port. If there is no
root port, then this switch has been accepted as
the root device of the Spanning Tree network.
The number of times the Spanning Tree has been
reconfigured.
The time since the Spanning Tree was last
reconfigured.
Spanning Tree Port Information :
==============================
Status Designated
Cost
NO LINK
NO LINK
NO LINK
NO LINK
NO LINK
FORWARDING
NO LINK
NO LINK
NO LINK
NO LINK
NO LINK
NO LINK
<APPLY> <OK> <CANCEL> <PREV PAGE> <NEXT PAGE>
P
ROGRAM
Designated
Bridge
5011 32768.0010B54C1EB6
5011 32768.0010B54C1EB6
5011 32768.0010B54C1EB6
5011 32768.0010B54C1EB6
5011 32768.0010B54C1EB6
4992 32769.2000E8003889
5011 32768.0010B54C1EB6
5011 32768.0010B54C1EB6
5011 32768.0010B54C1EB6
5011 32768.0010B54C1EB6
5011 32768.0010B54C1EB6
5011 32768.0010B54C1EB6
Port 1 - 12
Designated
Port
128.1
128.2
128.3
128.4
128.5
0.6
128.7
128.8
128.9
128.10
128.11
128.12