Chapter 2 User Setup Guide
2.5.3 Configuring Port Forwarding on your VDSL Router
Configure the following settings in the Advanced Setup > NAT > Virtual Servers > Add screen.
• Leave the interface set to the default unless you have configured another interface to use.
• Select Custom Service and type RD in the field.
• Type the LAN IP address of your computer in the Server IP Address field. To check this on your
home computer, click Start, All Programs, Accessories and then Command Prompt. In the
Command Prompt window, type "ipconfig" and then press [ENTER]. This example uses
192.168.1.64. See
• Type 3389 in the External/Internal Start/End Port fields. This is the listening port for
Windows remote desktop.
• Select the TCP in the Protocol field.
32
Configuring Static DHCP
to configure a Static DHCP rule for this IP address.
Basic Home Station VDSL2 P8802T User's Guide