Remote Node Ip Routing Policies - ZyXEL Communications Prestige 642 User Manual

Prestige 642 ADSL Internet Access Router
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP Setup:
DHCP= None
Client IP Pool Starting Address= N/A
Size of Client IP Pool= N/A
Primary DNS Server= N/A
Secondary DNS Server= N/A
TCP/IP Setup:
IP Address= 192.68.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-2B
Multicast = IGMP-v2
IP Policies= 2,4,7,9
Edit IP Alias= No
Press Space Bar to Toggle.
Figure 11-4

11.2.2 Remote Node IP Routing Policies

Go to Menu 11.3 (shown next) and enter the number(s) of the IP Routing Policy set(s) as appropriate. You
can cascade up to four policy sets by entering their numbers separated by commas.
Menu 11.3 - Remote Node Network Layer Options
VPI/VCI LLC-mux or PPP/PPPoE Encap :
VPI #= 1
VCI #= 1
IP Options :
Rem IP Addr: 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
Single User Account= No
Metric= 2
Private= No
RIP Direction= Both
Version= RIP-2B
Multicast= None
IP Policies= 1,3,5,10
Figure 11-5
11-6
Enter here to CONFIRM or ESC to CANCEL:
Menu 3.2 - General Ethernet Setup
IPX Options :
Enter here to CONFIRM or ESC to CANCEL:
Menu 11.3 - Remote Node Network Layer Options
Rem LAN Net #= 00000000
My WAN Net #= 00000000
Hop Count= 1
Tick Count= 2
W/D Spoofing(min)= N/A
SAP/RIP Timeout(min)= N/A
Dial-On-Query= N/A
Bridge Options:
Dial-On-Broadcast= N/A
Ethernet Addr Timeout(min)=
Enter your IP
Policy sets
here.
Enter your IP
Policy sets
here.
IP Policy Routing