Remote Node Ip Routing Policies; Figure 11-4 Menu 3.2 - General Ethernet Setup - ZyXEL Communications Prestige 642R Series User Manual

Prestige 642R Series ADSL Router
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP Setup:
TCP/IP Setup:
Press Space Bar to Toggle.

11.2.2 Remote Node IP Routing Policies

Go to Menu 11.3 (shown next) and enter the number(s) of the IP Routing Policy set(s) as appropriate. You
can cascade up to four policy sets by entering their numbers separated by commas.
VPI/VCI LLC-mux or PPP/PPPoE Encap :
VPI #= 0
VCI #= 35
IP Options :
Rem IP Addr: 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
Single User Account= No
Metric= 2
Private= No
RIP Direction= Both
Version= RIP-2B
Multicast= None
IP Policies= 1,3,5,10
Figure 11-5
11-6
DHCP= None
Client IP Pool Starting Address= N/A
Size of Client IP Pool= N/A
Primary DNS Server= N/A
Secondary DNS Server= N/A
Remote DHCP Server= N/A
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-2B
Multicast = IGMP-v2
IP Policies= 2,4,7,9
Edit IP Alias= No
Press ENTER to Confirm or ESC to Cancel:
Figure 11-4 Menu 3.2 - General Ethernet Setup
Menu 11.3 - Remote Node Network Layer Options
Enter here to CONFIRM or ESC to CANCEL:
Menu 11.3 - Remote Node Network Layer Options
IPX Options :
Rem LAN Net #= 00000000
My WAN Net #= 00000000
Hop Count= 1
Tick Count= 2
W/D Spoofing(min)= N/A
SAP/RIP Timeout(min)= N/A
Dial-On-Query= N/A
Bridge Options:
Dial-On-Broadcast= N/A
Ethernet Addr Timeout(min)= 0
Enter your IP
Policy sets
here.
Enter your IP
Policy sets
here.
IP Policy Routing