Table of Contents
Advertisement
P-335 Series User's Guide
35.2.2 Console Port Speed
You can set up different port speeds for the console port through Menu 24.2.2 – System
Maintenance – Console Port Speed. Your Prestige supports 9600 (default), 19200, 38400,
57600 and 115200 bps. Press [SPACE BAR] and then [ENTER] to select the desired speed in
menu 24.2.2, as shown in the following figure.
Figure 210 Menu 24.2.2 System Maintenance : Change Console Port Speed
35.3 Log and Trace
There are two logging facilities in the Prestige. The first is the error logs and trace records that
are stored locally. The second is the syslog facility for message logging.
35.3.1 Syslog Logging
The Prestige uses the syslog facility to log the CDR (Call Detail Record) and system messages
to a syslog server. Syslog and accounting can be configured in Menu 24.3.2 — System
Maintenance - Syslog Logging, as shown next.
Figure 211 Menu 24.3.2 System Maintenance : Syslog Logging
You need to configure the syslog parameters described in the following table to activate syslog
then choose what you want to log.
Table 131 Menu 24.3.2 System Maintenance : Syslog and Accounting
PARAMETER
Syslog:
Active
Syslog Server IP
Address
370
Menu 24.2.2 – System Maintenance – Change Console Port Speed
Console Port Speed: 9600
Press ENTER to Confirm or ESC to Cancel:
Menu 24.3.2 - System Maintenance - Syslog Logging
Syslog:
Active= No
Syslog Server IP Address= 0.0.0.0
Log Facility= Local 1
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Press [SPACE BAR] and then [ENTER] to turn syslog on or off.
Enter the IP Address of the server that will log the CDR (Call Detail Record) and
system messages i.e., the syslog server.
Chapter 35 System Information and Diagnosis
Advertisement
Table of Contents
Troubleshooting
