How To Prepare The Robot Network Connection; Method 1: Manual Connection - Universal Robots UR3e Manual

3. Dual robot calibration: Preparation
To configure the robot safety settings
1. Tap Safety and select Robot Limits.
2. Enter the password: lightbot and tap Unlock.
3. Tap Apply to unlock the Safety Configuration.
4. When the Safety Configuration dialog box appears, select Apply and restart.

3.5. How to prepare the robot network connection

Select a method, based on your connection type.
•
Method 1 Manual: hen the robots are already connected to a local area network
•
Method 2 Master/Slave: for robots connected directly with single network cable

3.5.1. Method 1: Manual connection

Use this method when the robots are already connected to a local area network.
User Manual 5 Kinematic Calibration