Adjusting The Amount Of Overdrive; Settings The Spread Of The Speaker; Settings The Speaker Volume Level; Setting The Rotary Shift Time - Roland V-Combo VR-760 Owner's Manual

Detailed Settings for Each Function (EDIT)

Adjusting the Amount of Overdrive

Overdrive Level (0–127)
This adjusts the amount of the overdrive (distortion) effect
applied. The sound becomes more distorted more as the
value is increased.

Settings the Spread of the Speaker

Rotary Woofer Spread (0–10)
Specify the spaciousness of the low-range speaker (woofer).
Specifies the left/right spread of the rotary speaker.
Increasing this value will increase the sense of stereo.
Rotary Tweeter Spread (0–10)
Specify the spaciousness of the high-range speaker (tweeter).
Specifies the left/right spread of the rotary speaker.
Increasing this value will increase the sense of stereo.

Settings the Speaker Volume Level

Rotary Woofer Level (0–127)
Specifies the volume of the low-range speaker (woofer).
The rotary speaker effect consists of a low range and a high
range, and you can independently adjust the volume of the
low-range speaker (woofer) and the high-range speaker
(tweeter) to set as desired.
Rotary Tweeter Level (0–127)
Specifies the volume of the high-range speaker (tweeter).
The rotary speaker effect consists of a low range and a high
range, and you can independently adjust the volume of the
low-range speaker (woofer) and the high-range speaker
(tweeter) to set as desired.

Setting the Rotary Shift Time

Rotary Woofer Rise Time (0–127)
This specifies the speed at which the rotary speaker effect for
the low-range (woofer) will shift from slow to fast. The
change will occur more rapidly as this value is increased.
Rotary Tweeter Rise Time (0–127)
This specifies the speed at which the rotary speaker effect for
the high-range (tweeter) will shift from slow to fast. The
change will occur more rapidly as this value is increased.
Rotary Woofer Fall Time (0–127)
Specifies the rate at which the low-range speaker (woofer)
will change from the fast to the slow speed.
The change will occur more rapidly as this value is increased.
Rotary Tweeter Fall Time (0–127)
Specifies the rate at which the high-range speaker (tweeter)
will change from the fast to the slow speed.
The change will occur more rapidly as this value is increased.
72

Setting the Rotary Speed

Rotary Woofer Slow Speed (0–127)
Specifies the rotational speed for the Slow setting of the
rotary speaker. Specifies the rotational speed for the low-
range speaker (woofer). Increasing the value raises the speed.
Rotary Tweeter Slow Speed (0–127)
Specifies the rotational speed for the Slow setting of the
rotary speaker. Specifies the rotational speed for the high-
range speaker (tweeter). Increasing the value raises the
speed.
Rotary Woofer Fast Speed (0–127)
Specifies the rotational speed for the Fast setting of the rotary
speaker. Specifies the rotational speed for the low-range
speaker (woofer).
Increasing the value raises the speed.
Rotary Tweeter Fast Speed (0–127)
Specifies the rotational speed for the Fast setting of the rotary
speaker. Specifies the rotational speed for the high-range
speaker (tweeter).
Increasing the value raises the speed.
Setting the Distance from the Rotary
Speaker to the Mic
Rotary Mic Distance (0–10)
Specifies the distance from the rotary speaker to the mic. As
this value is increased, the mic and speaker will be located
further apart, and the volume will be modulated less.
Setting the Reverb Send Level of the
Organ Part
Organ Reverb Send Level (0–127)
This adjusts the amount of the organ part that is to be sent to
the reverb. With smaller values, the reverb is barely applied
even when the [REVERB LEVEL] knob on the panel is turned
up.