Changing The Settings When External Speakers Are Connected; Switching The Aux Out On/Off; Switching The Aux Out Mode - Roland AT800 Music Atelier Owner's Manual

Changing the settings when
external speakers are connected
The ATELIER has an Aux/Drums Output jack and Bass Output
jack on the bottom of the instrument.
By using this Aux/Drums Output jack to connect external
speakers or audio set, you can sound the reverb
(reverberation) from the speakers. An external reverb unit can
also be connected and used to apply reverb.
By making connections to the Aux/Drums Output jacks or Bass
Output jack, you can output the drums or bass sounds
separately. This is convenient when you've connected the
ATELIER to a mixer so that the overall volume balance can be
adjusted on the mixer.

Switching the Aux Out On/OFF

1.
Touch <System> on the Main screen.
The System screen appears.
fig.10-11.eps
2.
Touch < > < > to display the Aux Out.
3.
Touch the Aux Out setting to switch between
"ON" and "OFF."
Each time you touch the Aux Out setting, it will alternate
between "ON" and "OFF."
4.
Touch <Exit>.
This setting remains stored in memory even while power is
turned off.
Connecting with External Device

Switching the Aux Out Mode

1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch < > < > to display the Aux Out
Mode.
3.
Touch the Aux Out Mode setting.
fig.10-11.eps
4.
Touch < > < > to change the setting.
Setting
Play the RSS reverb sound from the external
speakers
AMBIENCE
The reverb sound applied by the ATELIER will
be output.
Connect an external reverb processor and use
TO
it to apply the desired reverb.
EFFECTOR
The direct sound is output for applying reverb.
Use a connected mixer to adjust the volume
balance
Bass, drums, and other sounds will be output
separately.
SEPARATE
If the vintage organ type is "Flute," the bass
sound will not be output from the Bass bass
output jack. The bass sound will be output
from the Main Output jacks.
The accompaniment and Rhythm will be heard
from external speakers, creating the sensation
that you're playing with an orchestra
The sounds you play on the keyboard will be
ENSEMBLE
heard from the ATELIER's own speakers, and
the accompaniment will be heard from the
speakers that are connected to the Aux/
Drums Output connector.
5.
Touch <Exit>.
You can change the depth of Reverb for each part (p. 152).
This setting remains stored in memory even while power is
turned off.
Effects
249