User Tools - Ricoh FW770 Operating Instructions Manual

USER TOOLS

Access the User Tools to make the following adjustments:
A1) Not in use
A2) Semi Synchro Cut Adjustment; Allows you to adjust the cut length.
Without the Roll Feeder, A2) is not in use.
Hold down the Program key for at least 3
seconds.
"A.1" blinks on the "Copy Counter" display.
Press + key, "A2" blinks on the display
Press the Function Select key.
The "Paper Length" display shows the
current value.
Use the + and – key to change the value
Press the Program key to return to step 2.
Press the Clear Modes key to exit this mode.
36
–25 ~ +25mm (–1.0" ~ –1.0") (by 1mm, or 0.1")
Copy Media Lighter
Energy Set
Saver Original
Set RF
Paper Select
Wait
Lighter Copy
Vellum
Film
Darker
Emergency Stop
Paper Length
Semi Synchro
Preset/
Variable
Leading Edge
Copy Counter
Function Select
Clear Modes/
Energy Saver
Program
Clear/Stop
Cut Select
Preset Cut
RF Select /Cut