Ricoh FW770 Operating Instructions Manual page 243

B
Slide the paper straight into the copier until it stops, or press the { { { { RF Select/
Cut} } } } key to turn on the RF Select indicator.
C
Place the original.
D
Press the { { { { Function Select} } } } key when the leading edge of the area to be cop-
ied reaches the edge of the original table cover.
The "P" will stay on, not blinking.
The copier starts copying.
E
Press the { { { { Function Select} } } } key when the trailing edge of the area to be cop-
ied reached the edge of the original table cover.
The "P" will start blinking again.
F
After the paper has been delivered, hold down the { { { { Function Select} } } } key for
three seconds to turn the function off.
Partial Copying
3
33