Ricoh FW770 Operating Instructions Manual page 22

What Your Service Representative Can Change
F
Lead edge increase/decrease speed: The speed at which the
lead edge setting scrolls up or down can be changed. The time
for one increment (or decrement) can be set to 0.02, 0.05, 0.10,
0.25, or 0.5 second.
F
Auto clear time: If the copier is left alone for a while, it will clear
itself. The time needed can be changed to 1, 2, 3, 4, or 5 min-
utes. The function can also be turned off.
F
Energy saving: The fusing unit needs to be hot for copying.
When the copier is idle, the fusing unit can be kept hot to save
time or it can be allowed to cool to save energy. The feature can
be set to start automatically, but you can also turn it on yourself
by pressing and holding the Clear Modes/Stand-by key
three seconds.
F
Screen message: When the copier is idle, the copy counter can
be made to display a message. There are five possible messages:
"Pre_heat", "Sleeping", "0123456789", "Have a good day", and
"Hello I love you". The feature can also be turned off.
F
Function step setting: When changing the function setting (mar-
gin, multiple copies, or paper length) by holding down the + or - key,
the setting will change by a preset value. This value can be changed
to 1, 2, 3 or 10 units.
F
Paper length count up/down, Paper length up/down speed,
and Paper size pattern: When you press the preset length
key, the copier scrolls through a selection of preset paper sizes.
The copier can scroll through the preset lengths forward or
backward, and at different speeds. There are many sets of
sizes from which to choose. Ask your service representative for
details.
COPYING
for
17