Ricoh FW770 Operating Instructions Manual page 6

Making One Copy
To make a copy, you should first open the lower table of the copier (the
copy table); then pull out the original guides at the exit; place the copy
paper on the copy table; and last of all set the original on the top table of
the copier (the original table). When you've set the original, the copier
will take it in. Follow the steps below.
CAUTION: If during copying your original gets stuck in the copier,
press the Emergency Stop key .
1. Open the copy paper table.
2. Open the original guides but do
not force them.
3. If you want, set the image density
(page 7) and the leading edge
margin (page 8) or change the
copy media setting (page 13).
4. Set the copy and original guides
(option) on the copy table to
match the size of your copy pa-
per and your original.
* Original guides are shown closed
to keep illustrations clear.
COPYING
1