Ricoh FW770 Operating Instructions Manual page 149

Make sure that the "Set Paper" indicator is lit.
If it is off, press the Energy Saver key to exit Energy Saving mode.
If any previous settings remain, press the Clear Modes key.
Set the density, the number of copies, and other optional settings you requires such as Trailing
Edge.
Set the paper along the size indication on the
Bypass Table.
Slide the paper straight into the copier until it
stops. The copier will soon pull it in.
Set the Original Guide to match the original
width.
Paper Length
Cut Select
Synchro
Preset/
Variable
Preset Cut
Leading Edge
Trailing Edge
Copy Counter
Bypass Select/
Function Select Roll Paper Cut
Energy Set
Saver Original
Wait
Lighter Copy
Vellum
Film
Copy Media Lighter Darker
Emergency Stop
Clear Modes/
Energy Saver
Program
Clear/Stop
SM006
SM057
15