Ricoh FW770 Operating Instructions Manual page 12

Making Copies Darker Or Lighter
Making Copies Darker Or Lighter
To make darker or lighter copies, you should change the copier's den-
sity setting. There are 14 density levels: the standard density level,
three darker levels, and 10 lighter levels. Set the density with the
Lighter and Darker keys (
The indicator shows seven levels at a time. When you start from the
standard image density, the middle notch corresponds to the standard
image density, the three right notches correspond to the darker densi-
ties, the three left notches to lighter densities.
The brighter notch shows which level is now set. If you go lower than the
leftmost notch, the Lighter Copy indicator lights up. The notches on the
indicator will then correspond to the seven lightest levels.
To set the image density, follow the keystrokes below before setting
your original.
¶
Press the Lighter key to make
the image lighter.
& ) under the density indicator.
·
Press the Darker key to make
the image darker.
COPYING
C
C/
7