Making One Copy
¬
About the original guides...
The original guides you pulled out at the exit keep the original from going
into the copy paper entrance. Always use the original guides with originals
thinner than 0.1 mm, with very long originals, or with very curly originals.
When sliding the original into the copier...
When inserting the original in the copier, slide it in carefully, but quickly.
Otherwise, the original might skew as it goes through the machine.
9. The original comes out from the
opening just under the original
table
the slot on top of the copier
¬
. The copy is delivered from
COPYING
.
3