COPYING
Making Several Copies Of The Same Original
To make more than one copy of the same original, you have to reload the
original after each copy. If you're not using the roll feeder option, you also
have to set the copy paper for each copy.
1. Follow the key strokes below.
¶
Press the Function Select key until
the arrow points at Copy Counter.
¸
If you want to change the number,
press the + or - keys.
2. Proceed as for a usual copy, with sheet paper (page 1) or with
the roll feeder (page 4).
3. When the copy comes out, remove it and repeat step 2. Wait for
the Set Paper indicator to light up before loading a new sheet of
paper, and wait for the Set Original indicator (
before reloading the original. You don't need to press the RF Select
key again.
6
Making Several Copies Of The Same Original
·
Press the + key until you reach the
number of copies you want to make.
C
C/
¹
If you want to stop copying, press the
Clear/Stop key. The copier will finish
the copy being made, then stop.
) to light