Ricoh FW770 Operating Instructions Manual page 13

COPYING Leaving A Blank Margin At The Leading Edge
Leaving A Blank Margin At The Leading Edge
You can create a blank margin at the top of the copy (fig. a, the leading
edge), or have the leading edge of the image bleed off the copy (fig. b).
The copier does this by shifting the entire image backward or forward
according to the margin you set.
With the roll feeder, the length of the margin does not affect the length
of the paper. If you want to create a blank margin at the trailing edge,
simply set the paper length a little longer than the total length of the
original and lead margin. Set the margin before inserting the original.
d
M
d
b
b
b) Bleed image
a) Margin
Example: Leaving a blank margin at the top of your copy
Suppose you are copying a vertical A2 size diagram (about 17" x 22") to
a sheet of the same size. The diagram has a 5 cm (2") margin all around,
but you want a 10 cm (4") margin at the top to give you space to write
notes.
Make your copy following the instructions on page 1. When you reach
step 3 on page 1, follow the key strokes on the next page.
8