Ricoh FW770 Operating Instructions Manual page 159

Adjusting the Fusing Temperature Manually
Press the Copy Media key to turn on the
"Vellum" or "Film" indicator that you want.
Hold down the Copy Media key for at least
3 seconds.
The "Lighter Copy" display will show the
current fusing temperature. The unlit indica-
tor shows the current temperature.
Press the Lighter key to decrease the tem-
perature, and press the Darker key to increase
the temperature.
The number of temperature levels available
depends on the paper type:
Plain paper
Vellum
Film
After you have finished the setting, press the Copy Media key.
Choose any copy settings you require, then start copying.
Notes
p The new fusing temperature for the selected paper type is cleared when you press the Clear
Modes key or turn off the main switch.
26
: 1234567
: 1234
: 1234
Energy Set
Saver Original
Wait
Lighter Copy
Vellum
Film
Copy Media Lighter Darker
Emergency Stop
Clear Modes/
Energy Saver
Program
Clear/Stop