Ricoh FW770 Operating Instructions Manual page 19

COPYING
Programming Settings You Often Use
There are two ways of programming settings you often use. First, you
can link a collection of settings to the Program key
copier will recall your settings whenever you press that key.
Second, you can change the copier's default settings so that those you
want appear every time you turn the copier on or press the Clear Modes
key.
1–Programming a collection of settings
If you often find yourself using the same margin and density settings,
you can have these settings appear at the stroke of a single key.
Press the Program key to tell the copier to store the following key
strokes in memory. Input the settings you want to program, then make a
copy to store the settings in memory.
C/
14
Programming Settings You Often Use
1. Press the Program key.
2. Input the settings you want to
C
3. Make a copy, then press the
C/
program.
Program key again.
; this way the