Ricoh FW770 Operating Instructions Manual page 14

Leaving A Blank Margin At The Leading Edge
¶
Press the Function Select key until the ar-
row points at Lead Margin.
¸
Press the + key until the display shows 5.0.
When you have the margin you want, continue as for any other copy. You
will obtain a copy with a 10 cm (4") blank margin at the top (5 cm set by you
plus 5 cm on the original) and no margin at the bottom.
If the original had no blank margin surrounding it, you would have ob-
tained a copy with a 5 cm blank margin at the leading edge, and with the
bottom 5 cm of the original cut off the copy.
Example: Leaving a blank margin at the bottom of your copy
Suppose in the first example you had instead wanted the margin at the
bottom of your copy instead of the top. In that case, in step
would have had to press the - key until -5.0 appeared in the display. The
image would have been shifted forward on the copy and a 10 cm margin
would have been left at the bottom of the copy (5 cm set by you plus 5 cm
on the original) and no margin at the top.
·
The margin is displayed here,
in millimeters.
C
C/
COPYING
¸
above, you
9