Center your original
Table. Slide the original straight into the copier
until the copier pulls it in.
Just as the trailing edge of the original passes
the horizontal line of the Semi-auto synchro
cut mark, press the Cut key.
Notes
p To cancel copying, press the Clear/Stop key. The copier finishes the operation in progress, and
delivers the copy and the original.
p
To call off on-going copying, for example, when you have inserted a wrong blueprint, press the
Cut key. The machine interrupts the operation in progress, and delivers the copy and the
original.
face up
on the Original
SB015
SB016
21