COPYING
Copying With The Roll Feeder
To make a copy using the roll feeder option, you do not need to set pa-
per on the copy table; the paper will be fed to the copier from the roll
feeder. You should first input the paper length and other settings, then
press the RF Select key
ble (the original table). Follow the procedure below.
¶
Press the Function Select key until
the arrow points at Paper Length.
¸
If you want to change the size, press
the + and - keys until the size you want
appears in the display.
4
Copying With The Roll Feeder
, and lastly place the original on the top ta-
1. Set the original guides (option) to
match the size of your original.
2. Follow the key strokes below.
·
Press the Preset Cut key to choose a
paper length. The length appears in the
display, in millimeters.
¹
If you want, set the image density
(page 7) and the leading edge mar-
gin (page 8) or change the copy me-
dia setting (page 13).
C
C/