Ricoh FW770 Operating Instructions Manual page 167

B) Changing The Default Setting
Turn the main switch off.
Hold down the Emergency Stop key, then
turn the copier back on.
The jam and service indicators will blink.
Input the settings you want.
Turn the main switch off.
The next time you turn the copier on or press the Clear Modes key, the settings you programmed
in step 3 will take effect.
34
Energy Set
Saver Original
Wait
Lighter Copy
Vellum
Film
Copy Media Lighter Darker
Emergency Stop
SM067
Clear Modes/
Energy Saver
Program
Clear/Stop