Ricoh FW770 Operating Instructions Manual page 18

Copying To Different Media
Copying To Different Media
If you copy to film or vellum (translucent or tracing paper) you need to
set the copy media, otherwise the copy might come out creased or
wavy.
To make a copy, the copier deposits a layer of black resin powder,
called toner, on the copy paper. It then applies heat so that the toner
melts and fuses to the paper. Some papers require more heat to fuse
well, others less. Press the copy media key to select a type of paper, but
for most kinds of plain paper both indicators should be off.
Type of paper Media setting
Plain paper
Film
Vellum
Heavy paper
Thin paper
Set the proper fusing temperature with the Copy Media key
Both indicators off
on
on
on
No indicator, or if
necessary, on.
This list is not complete. If you are not
sure of what type of paper you have,
check the label on the paper package.
If these settings do not match your paper,
try different settings.
C
C/
COPYING
13