Copying Only A Selected Portion Of The Original
Example: copying the middle band of an A2 poster
Suppose you are copying an A2 size poster (about 17" x 22") of a sea-
shell, as shown on the previous page, and you want to copy only the
middle portion of the shell. Follow the steps below.
¶
Press and hold the Function Select
key for three seconds, then proceed
as for a usual copy. A "P" will blink in
the lead margin display.
¸
When the end of the portion you want to
copy goes under the cover, press the
Function Select key again. The "P" will
start blinking again.
·
When the beginning of the portion you
want to copy goes under the cover,
press the Function Select key. The
"P" will stay on, not blinking.
C
C/
¹
Press and hold the Function Select
key for three seconds to turn the
function off. The "P" will disappear.
COPYING
11