Building A Proprietary Phonebook Directory - Multitech MultiVOIP MVP120 User Manual

Building a Proprietary Phonebook Directory

Note: This section starts at Step 27 as it is a continuation from Step 26 on pages 27-28.
27. To build your proprietary MVP120 Phone Directory (in an H.323 environment without the
Gatekeeper option enabled), you will first need to select the Proprietary Phonebook
option and then configure the "Master" MVP120 and then the "Slave" MVP120s (or other
H.323 endpoints). Configuring the "Slave" MVP120 is discussed later in this chapter.
The MultiVOIP configured as Master contain the proprietary phonebook database. All
ohter MultiVOIPs added to the proprietary phonebook database are designated Slaves.
The master database contains the phone numbers of all H.323 endpoints available for
communication on an IP network. This database is downloaded to each Slave MultiVOIP
as it comes online.
28. To configure the "Master" MVP120, make certain that the Proprietary Phonebook and
Master options are enabled. The Slave option, Master IP Address, and Send Status
Report to Master will be disabled. The Slave Status button displays the Slave VOIP
Status dialog box used for viewing phone number, IP address, status, and description of
slave units (See "Configuring Your Slave MVP120s" for details). Note: In the Q.931
Parameters group, Use Fast Start is checked for compatibility with other H.323 devices
that support Fast Start Capability.
Click Add to begin building your phone directory database. The Add/Edit Phone Entry
dialog box displays.
Multi-Tech Systems, Inc. MultiVOIP User Guide
Chapter 4 - Configuring the Master MultiVOIP
31