Registering User Information - Kyocera KM-4035 Operation Manual

Preparation for Usage

Registering User Information

Please register a user. The setting items are as follows.
Configuration Item
E-mail address
IP address or host name
Name to display
User password
Save folder No.
1 Continue the process Scanner Basic Settings on page 2-32 for 1 to 3.
Press [User registr.] ([User register]).
2
3 Press [ ] or [ ] to select the user
number to register and press [Change
User Info.].
To correct an already registered user,
press [ ] or [ ] to select the user to
correct and press [Change User Info.].
If a user password has been set, enter
the password.
NOTE: To delete a registered user, press [ ] or [ ] to select the user to delete and press [Delete].
4 Press [ ] or [ ] to select the item to
configure and press [Change #].
Continue to follow the screen
instructions.
2-34
Description
For Send E-mail, mail will be sent to this address when
recipients reply to the received mail. Also, transmission error
notifications will be sent to this address.
When selecting Scan to PC as the destination, select Save to
User PC to send a graphic image to the computer at this
address.
Username shown during user selection. This value must be
entered.
Input a password less than 8 characters long (numerals only) to
be input during user selection. (Password entry is optional)
Folder number to specify as destination when Save to User PC
is selected. Use Scanner File Utility to set the folder
corresponding to this number. Input a 3 digit number (from
001-100).
Only one save location folder number may be registered here.
System Menu / Counter
Scanner setting menu
System Func. Def.
Basic setting.
System Menu
elete
User
User A
- Scanner setting menu
Correct User Info.
Registration list:user list
Setting item
E-mail address
IP address or host name
Name to display
User password
Save folder No.
Information
User number : 2.
User
registr.
End
Change
User Info.
Up
Delete
Down
Setting value
(Not specified)
(Not specified)
(Not specified)
(Not specified)
Change #
(Not specified)