Kyocera KM-4035 Operation Manual page 113

9 Changed items are identified with a *
mark. When satisfied with changes,
select Indexing complete and press
[Enter].
10 At the machine, place the original, and press the Start
key to begin scanning.
NOTE: Configure various settings from the operation
panel. Change settings as necessary.
If a setting is changed from both the computer and
from the operation panel, the settings from the
operation panel take priority.
To reconfigure text data input, press [Try
again input data].
To end the operation, press [Cancel]
([Job cancel]).
11 The following screen is displayed when
scanning is complete. To finish scanning
originals, press [Input data complete].
The KM-DB Assist function adds text the
previously registered text information
(keywords) to the scanned image and
saves to the specified folder.
The Database Assist function adds text
information from the scanned image as
a CSV file and save to the specified folder.
NOTE: To re-use the database connection, press [Sel. folder input data]. Follow Step 4 from
page 3-29.
To re-use the database connection with the same settings, press [Same mode input data]. Follow
Step 6 from page 3-30.
To re-use the database connection with the same Assist function selection, press [Input of new
data]. Follow Step 5 from page 3-30.
File Information
Indexing completed
File Name
Subject
Keyword
Comment
Please select item for setting. 003-006 can be set for PDF only.
to scan. ( Full-Color
als then press Start key.
ection
ata
Select
Orig.Size
Select
Send Size
Try again
input data
Press 'Input data complete'key.
Select the method to continue
Dest. of input data:
File A
Sel.folder
input data
User name: 001.
Basic Operation
Back
Creator
) Original Send
11×8½" 8½×11"
08/08/'05 14:00
Cancel
Auto Top Edge
Orig. Set
Direction
Auto size 200dpi PDF
Scanning
File Type
Resolution
Basic
Quality Edit
How-continue
Same mode
input data
Input of
new data
08/08
3-31