Kyocera KM-4035 Operation Manual page 103

NOTE: If the scanner default setting for Selec. of senders (users) is set to [On], user number 001
will automatically be selected.
If a password was entered when the user was registered, the password input screen is displayed.
Input the password and press [Enter]. If the password is correct, the scanner settings screen is
displayed.
4 To input a mail address, press [Enter
dest.].
5 Enter the e-mail address for the
destination (recipient). After inputting,
press [End] to display the sending
method screen.
6 Select whether to send as [To:], [CC:], or
[BCC:] and press [Enter].
7 Press [Address Book] to use a private
address book or common address book.
8 Press [Common] ([Common book]) or
[Private] ([Private book]) to display the
destinations stored in the selected
address book. In this example a
destination is selected from the
Common Address Book.
Press [ ] or [ ] to select a destination
and select whether to send as [To:],
[CC:], or [BCC:].
When a destination is selected, an ⌧ is displayed next to it in the Select column to the right of the
Address column.
Ready to scan.
Place the original and select destination.
Send E-mail-Sending
Destination
Delete
Enter Address
dest. Book
s
Char.Limit:64 letters including #
d of receiver.
To:
CC:
BCC:
Ready to scan.
Place the original and select destination.
Send E-mail-Sending
Destination
Delete
Enter Address
dest. Book
Address Book
Symbol 0-9 Address
User A
ABC DEF GHI
JKL MNO PQR
STU VWX YZ
Common Private
Basic Operation
( Full-Color )
Original
11×8½"
08/08
Register Prgrm Cont. TX to
Auto Top Edge
Select Orig. Set
Orig.Size Direction
Auto size 200dpi
Select Scanning
Send Size Resolution
Basic
Quality
Stop End
Back Del.
Space
Back Stop
Enter
( Full-Color ) Original
11×8½"
08/08
Register Prgrm Cont. TX to
Auto Top Edge
Select Orig. Set
Orig.Size Direction
Auto size 200dpi
Select Scanning
Send Size Resolution
Basic
Quality
Select: 1.
Up
Down
3-21