Kyocera KM-4035 Operation Manual page 39

1 Pull the cassette out toward you until it stops.
2 Adjust the paper length guide to fit the paper size.
NOTE: Paper sizes are marked on the cassette.
3 Holding the paper width adjusting tab both ends, move
the paper width guide to fit the paper.
NOTE: Paper sizes are marked on the cassette.
When loading paper smaller than 11 × 8
Cassette 1, raise the support lever as shown in the
illustration.
4 Align the paper flush against the left side of the
cassette as you load it.
" or A4 into
1/2
Preparation for Usage
2-3