Preparation for Usage
Preparing the Printer
Network (TCP/IP) Settings
To use this device as a network printer, first set the device IP address.
NOTE: Set the IP address according to the operating environment. Obtain this address from your
network administrator.
For environments that use DHCP or BOOTP to automatically assign the IP address, this setting is
not required because the DHCP or BOOTP setting is enabled by default.
1
Press the Printer key.
2
Press [Printer Menu].
3
Press [Interface].
4
Press [Network].
2-22
Ready to print.
Printer
Menu
Select item.
Printer menu
Print Sta-
Font
tus Page
Interface
Page Set
Print
Emulation
Quality
Interface
Setting Item
NetWare
On
TCP/IP
On
Ethertalk
On
Network Status Page
Off
Parallel
Network
Printer menu
Cancel
Paper
Others
Handling
Color Mode
RAM DISK
Mode
Value
Change #
USB