Loading Paper In The Mp Tray - Kyocera KM-4035 Operation Manual

NOTE: Before loading the paper, be sure that it is not
curled or folded. Curled or folded paper may cause
paper jams.
Ensure that the loaded paper does not exceed the
level indicated.
3 Gently push the cassette back in all the way.

Loading Paper in the MP Tray

In addition to standard and recycled paper, special paper (60 - 220 g/m
of 11 × 8
(80 g/m
Paper sizes 11 × 17" - 5
The capacity of the MP tray is as follows.
Paper types
Standard paper (80 g/m
colored paper
Standard paper (120 g/m
or transparencies
IMPORTANT: When making color copies, use special color paper for best results.
Do not use inkjet printer paper or paper with special surface coatings. (They may cause a failure,
such as a paper jam.)
After loading paper, be sure to specify the type and size of the paper loaded in the MP tray on the
operation panel. For further details, refer to Specifying the Paper Size to the MP Tray on page 2-10
and Specifying the Paper Type to the MP Tray on page 2-15.
1 Open the MP tray.
When loading paper larger than 8
out the MP tray extension.
" or A4 or smaller size paper (80 g/m
1/2
2 ) may be loaded.
× 8
1/2 1/2
2 ), recycled paper,
2 , 160 g/m
2 ) or 50 sheets of 8
", A3 - A6R, 8K, 16K, and 16KR can be loaded.
Capacity
11 × 8
1/2
8 × 14"or B4 or larger: 50 sheets
1/2
2 , 200 g/m 2 ) 10 sheets
× 11" or A4R, pull
1/2
Preparation for Usage
2 ) may be loaded. 100 sheets
× 14" or B4 or larger paper
1/2
" or A4 or smaller: 100 sheets,
2-5