Kyocera KM-4035 Operation Manual page 69

2 Press [Scanner Default].
3 Use the numeric keys to enter the 4 digit management code. The default setting is 2500 for the
25/25 ppm model, 3200 for the 32/25 and 32/32 ppm models and 4000 for the 40/35 ppm model.
If the correct management code has been entered, the Scanner setting menu screen will be
displayed.
NOTE: If the optional security kit has been installed, the management code is 8 digits long. The
default setting is 25002500 for the 25/25 ppm model, 32003200 for the 32/25 and 32/32 ppm
models and 40004000 for the 40/35 ppm model.
4
Press [System Basic].
NOTE: If Unable to use scanner is
displayed, return to the System Menu
screen, and after waiting (about 2
minutes), press [System Basic] again.
5 Press [ ] or [ ] to select Host name
and press [Change #].
6 Input the host name and press [End]. The host name is saved and the System Basic screen is
displayed.
7 Refer to Steps 5 - 6 to continue setting other items.
8 Press [Close] after all settings are complete. Scanner setting menu screen is displayed.
System Menu / Counter
System Menu
Copy
Default
Scanner Printer
Default Default
Machine Document
Default Management
System Menu / Counter
Scanner setting menu
System Func. Def.
Basic setting.
System Menu
System Menu / Counter
System Basic
Default menu
Host name. Scanner.
IP address 10.181.125.31.
Subnet Mask 255.255.0.0.
Default Gateway
10.181.125.1.
DHCP/BOOTP Valid
System Menu - Scanner setting menu
Preparation for Usage
Job
Language
Accounting
MP tray BOX
Setting Management
Register Print
Orig. Size Report
User
registr.
Setting mode
Change #
2-33
A