Kyocera KM-4035 Operation Manual page 115

3 Select a destination (user name). Either
press the number key or use the
numeric keys to enter the user number
and press [Enter].
NOTE: If the scanner default setting for Selec. of senders (users) is set to [On], user number 001
will automatically be selected.
If a password was entered when the user was registered, the password input screen is displayed.
Input the password and press [Enter].
4 Press [Address Book].
5 Press [ ] or [ ], select the desired
destination FTP server and press [Enter]
([Add dest.]). Log in to the destination
FTP Server.
When a destination is selected, an ⌧ is
displayed next to it in the Select column
to the right of the Address column.
6 If destination FTP server is selected
where in Skip Auth. info Input (Modifying
Common Address Book on page 2-35)
has been set to [Off], at the following
step enter the usename and password
and press [Close].
Username entry
1 Press [Change #] for the username.
2 Input the username.
3 Press [End].
Password entry
1 Press [Change #] for the password.
2 Enter the password.
3 Press [End].
7 Press [Close].
name.
Ready to scan.
Place the original and select destination.
Scan to FTP-Sending
Destination
Address
Book
0-9 Address Select:
FTP01
GHI
O PQR
X YZ
User Name & Password
User name
On
Password
Destination :ftp001
Basic Operation
Stop
User number
(with #key)
Enter
( Full-Color ) Original
11×8½"
Register Prgrm Cont. TX to
Auto Top Edge
Select Orig. Set
Orig.Size Direction
Auto size 200dpi
Delete
Select Scanning
Send Size Resolution
Basic
Quality
Close
Address
0.
Up
Properties
Down Enter
Back
Change #
Change #
08/08
3-33