Kyocera KM-4035 Operation Manual page 73

6 Destination Registration
Select the item to be configured using
[ ] or [ ] and press [Change #]. The
settings configuration screen is
displayed. Follow the screen instructions
to make the changes. When done, press
[Complete entering] to save the
destination.
7 Group Registration
Press [Information], press [ ] or [ ] to
select the item to be configured and
press [Change #]. The settings
configuration screen is displayed. Follow
the screen instructions to make the
changes.
Press [Destination] and press [Add
dest.]. The destination registration
screen is displayed. Press [ ] or [ ] to
select the destination to be added and
press [Add].
When done, press [Complete entering]
to save the group.
NOTE: Perform destination registration before group registration. Destinations will not be shown in
the list until destinations have been registered.
Group registration is not possible for Scan to FTP.
Configuring Date/Time and Time Difference
Configure the necessary regional information for the e-mail sending functionality.
The time the e-mail was sent from the scanner will be recorded as the transmission time in the
e-mail header. Follow the steps below to set the date, current time and time difference from GMT
(Greenwich Mean Time).
1 Press the System Menu/Counter key.
New Dest. Register
Registra.list:Scan to PC address book
Setting item
IP address or host name (Not specified)
Name to display (Not specified)
Save folder No. (Not specified)
Information
Register new group
Registra.list:Scan to PC address book
Setting item
Name to display (Not specified)
Password (Not specified)
Information
Destination
Register new group
Registra.list:Scan to PC address book
Display name
UserA 10.111.111.112
UserB 10.111.111.113
UserC 10.111.111.114
Information Destination
Preparation for Usage
Setting value
Change #
# of re
Setting value
Change #
# of re
Destination
Delete
Add
dest.
# of re
2-37