Kyocera KM-4035 Operation Manual page 59

5 Press [ ] or [ ] to select TCP/IP and
press [Change #].
6 Press [On] below TCP/IP.
7 Press [ ] or [ ] to select DHCP and
press [Change #].
8 Press [Off] and press [Close].
9 Press [ ] or [ ] to select BOOTP and press [Change #].
10 Press [Off] and press [Close].
Interface
Setting Item
NetWare On
TCP/IP On
Ethertalk On
Network Status Page Off
Parallel Network
Printer menu
TCP/IP
TCP/IP
Off
On
Printer menu - Interface - Network
Setting Item
DHCP
BOOTP
IP Address
Subnet Mask
Gateway
terface - Network
DHCP Setting
Off
On
Printer menu - Interface - Network
BOOTP Setting
Off
On
Printer menu - Interface - Network
Preparation for Usage
Value
Change #
USB
Back
Setting Item Value
DHCP On
BOOTP On
IP Address 0. 0. 0. 0
Subnet Mask 0. 0. 0. 0
Gateway 0. 0. 0. 0
Back Close
Value
On
On
0. 0. 0. 0
0. 0. 0. 0
Change #
0. 0. 0. 0
Back
- TCP/IP
Back
- TCP/IP
2-23